Especificações N1007-29G tattoo foot switch steel
1.Material: Aço inoxidável
2.Item: Pedal do tatuagem
3.Length: 2.0m
4. Alta qualidade
Mostra de novos produtos
N1007-29G tatuagem interruptor de pé aço
Nós fazemos 8wraps, 10wraps, 12warps, 14wraps máquina de tatuagem também.
Boa vinda para personalizar, fazer a máquina do tatuagem de acordo com seu estilo e exigências.
Materiais diferentes de Suppy para a máquina do tatuagem, como o ferro, o bronze, o aço inoxidável, o cobre, etc.
Type |
Tattoo Foot Pedal |
Length |
200cm |
Color |
Many colors |
Material |
Stainless steel |
Forma de pagamento:
Region |
Shipping Agent |
Days |
US,CA |
UPS/DHL/Fedex |
3-4(EMS +4days) |
UK,IR,W/E Europe |
UPS/DHL/Fedex |
3-5(EMS +4days) |
Middle East |
UPS/DHL/Fedex |
3-5(EMS +4days) |
AU,NZ |
UPS/DHL/Fedex |
3-5(EMS +4days) |
Asia |
UPS/DHL/Fedex |
3-4(EMS +4days) |
Afeica |
UPS/DHL/Fedex |
4-6(EMS +4days) |
South America |
UPS/DHL/Fedex |
3-5(EMS +4days) |
Russia |
UPS/DHL/Fedex |
contact me |
Q: A Freedom Tattoo Supplies recebe devoluções?
R: Sim, fazemos. O cliente deve telefonar ou enviar um e-mail explicando o motivo da devolução. O envio de retorno do item (s) é de responsabilidade do cliente. Se o erro for de nossa parte, nós enviaremos para fora o artigo da substituição gratuitamente. Flash, agulhas abertas ou tubos descartáveis abertos não são retornáveis em nenhuma condição.
P: Como você envia ordens?
A: Nós temos cinco expresso: UPS, FEDEX, DHL, EMS. Para a ordem grande, nós expediremos pelo mar.
P: Quanto tempo demora para receber a minha encomenda?
R: Nós faremos todos os esforços para enviar sua ordem no prazo de 3-7 dias úteis do recibo. Durante os feriados, nosso tempo de processamento de pedidos pode aumentar devido a backups.
P: Quais métodos de pagamento são aceitos?
R: Aceitamos três pagamentos: Bank Transfe, West union, PayPal.
Informação extra.
Por que não pode iniciar a máquina?
Malfunction |
Solution |
The elastic rod does not touch the contact point of the inclined spring plate |
Loosen the screw of elastic rod, rotate down the elastic rod to the contact point, and then regulate the rod to the right position. Finally tighten the screw to lock the elastic rod. |
The switch is off |
Connect it to 220V AC power supply and turn on the switch. The indicator turns red. |
Both of adjustable knob (VOLTAGE) and V meter hand are in "0" |
Rotate the adjustable knob clockwise slowly. Simultaneously, V meter hand is also moving and should stop at 10V-12V. |
The elastic rod touches the contact point of front spring so tightly that the machine cannot start and maybe will cause short circuit. Turn on the switch and the indicator turns green (No voltage) |
Loosen the screw of elastic rod, rotate up the elastic rod and then rotate it down to the contact point, and finally regulate it to the right position. Restart the power, the machine will be ok. |
Disconnection |
Check the foot switch and the plug to avoid disconnecting the cord from the joint position caused by careless jerk. |
Broken wires |
The wires be susceptible to damage while washing and sterilizing the tattoo machine, so please confirm the wires condition and have the broken ones welded before use. |
Problems of plugs and foot switch |
Turn on the switch and check whether the plugs of cord and foot switch are broken or not, when short circuit happens (green indicator). The damaged ones should be welded with electric welding rod. |
Lista de produtos
Pedal; Pedal poder; Interruptor de pé 1/4 polegadas; Interruptor de pé cabine 1/4 polegadas; Interruptor de pé 14 polegadas; Interruptor de pé; Pé interruptor tatuagem; Hot pé fornecimento de tatuagem interruptor; Pedal switch / pé interruptor; Plástico tatuagem pedal; Crânio tatuagem interruptor de pé; Pedal de sustentação; Tatuagem interruptor de pé; Tatuagem interruptor de pé aço inoxidável; Tatuagem pé interruptor de aço; Máquina de tatuagem pé interruptor; Pedal redondo tatuagem
Grupo de Produto : Fonte de alimentação para tatuagem > Pedal Tatuagem